搜索
广州流金岁月钟表维修 13925124671
打印

[问表类] 请问:关于1个美国彩金壳的问题?

[复制链接]
750159

   发表于 2019-1-27 18:38:21 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
有一种美国彩金怀表壳,既没有注明14k,有没有注明warranted  25 years 这样的字样,
请问:这样的怀表是不是实金的?

59条回复

返回列表
沙发
 楼主| 发表于 2019-1-27 18:40:16 | 只看该作者
我感觉这样的实金壳,从照片上看,各方面的工艺细节,和我买的14k实金的差不多!
就是没写是实金还是包金
板凳
 楼主| 发表于 2019-1-27 20:06:45 | 只看该作者
Gold-filled cases were made by sandwiching together 2 bars of gold (typically about 1/2" thick) on either side of a bar of base-metal, usually brass or brass-alloy (typically 3/4" thick). The 3 bars were soldered together under high pressure and high temperature in specially constructed ovens. The composite 3-layer bar was then rolled through high-pressure rolling mills until the desired thickness was reached. The gold layers could consist of 10-karat, 14-karat or 18-karat gold. While this process produced a thicker layer of gold than electro-plating, the gold content was still no more than 5-10% of the total case weight. As such, gold-filled watches do not have any significant gold value.------包金的做法
地板
 楼主| 发表于 2019-1-27 20:29:03 | 只看该作者
American Hallmarks?

The term "hallmark" originated in 1478 when London gold and silver smiths were first required to take their work to Goldsmiths' Hall to be assayed and marked. Today it is used to mean a control mark applied to precious metals after assay (testing) by a legally authorised body that is independent of the manufacturer of the item. This provides a reliable indication of the fineness of the precious metal which is otherwise difficult for a purchaser to assess without specialised equipment.

There has never been an equivalent system of hallmarking in America and so there are no such thing as "American hallmarks". Watch case manufacturers stamped their own marks onto watch cases to show the fineness of the metal. The customer must either rely on the veracity of those marks or make their own tests. In the case of a well known watch case maker relying on the marks will be safe, but one must always be alert to the fact that the marks might not be what they purport to be: caveat emptor.

5#
发表于 2019-1-27 20:34:03 | 只看该作者
引镜 发表于 2019-1-27 18:40
我感觉这样的实金壳,从照片上看,各方面的工艺细节,和我买的14k实金的差不多!
就是没写是实金还是包金

没有印记包金的居多.
可以赌赌看阿.
附上一粒沙版主的两则拣漏记以为参考.呵呵.
http://www.watchlead.com/wbbs/fo ... amp;extra=page%3D17
http://www.watchlead.com/wbbs/fo ... amp;extra=page%3D21
6#
发表于 2019-1-27 20:47:00 | 只看该作者
你这帖发在[问表类]
好像也有几分道理.哈哈.
7#
 楼主| 发表于 2019-1-27 20:58:03 | 只看该作者
gtgtgt 发表于 2019-1-27 20:47
你这帖发在[问表类]
好像也有几分道理.哈哈.

谢谢你啦!我个人认为,没有任何印记的表,有可能是实金,但是可能不够14k,所以没有打标。通过照片和我个人的收藏,感觉的。。。
8#
 楼主| 发表于 2019-1-27 21:01:08 | 只看该作者
Gold Case Markings

If a watch case is solid-gold it will usually be hallmarked or stamped with a karat symbol or assay mark, like "WARRANTED U.S. ASSAY". Proper case-marks are usually a good indication of gold-conten----------注意这个“usually”,意思是有“例外”
请参考:http://www.pocketwatchrepair.com/how-to/case-material.php
9#
 楼主| 发表于 2019-1-27 21:29:26 | 只看该作者
This is just a guess but it seems likely that the mark is a trademark for gold of too low a content to legally call gold. If it were near 14K or higher it would say so. The marks for 8K and 14K over 8K are also well known so we can rule out those possibilities.

Similary if it were gold filled, it would also likely state this becuase at this time a gold filled case cost more than a solid 8K case. With some experience one can feel the difference between gold filled and solid gold even of low gold content.---------通过国外论坛表友的回复,推测不足14k的不能打标而且8k实金价格不如包金贵,所以无所谓打不打标
10#
发表于 2019-1-27 21:50:07 | 只看该作者
不足14k如10k实金也会打印.
英国9k实金也会打印.
9k实金也能熔化提炼出黄金.
8k就没看过.
纵然8k壳价钱不如包金壳.
但8k实金壳也能熔化提炼出黄金.
提炼出的黄金应该比包金的壳多.
11#
 楼主| 发表于 2019-1-27 22:00:21 | 只看该作者
gtgtgt 发表于 2019-1-27 21:50
不足14k如10k实金也会打印.
英国9k实金也会打印.
9k实金也能熔化提炼出黄金.

包金的做法是:2片14k的金片,中间加一个基本金属(黄铜),像汉堡包一样的,通过高温高压特殊炉子做的。参考3楼
12#
发表于 2019-1-27 22:17:20 | 只看该作者
引镜 发表于 2019-1-27 22:00
包金的做法是:2片14k的金片,中间加一个基本金属(黄铜),像汉堡包一样的,通过高温高压特殊炉子做的。 ...

filled=填充.通常叫做包金.
包金的可能不用到金片.还是应该用镀上去的.
镀层厚一点.如20mic 20年包金.
13#
 楼主| 发表于 2019-1-27 22:28:16 | 只看该作者
gtgtgt 发表于 2019-1-27 22:17
filled=填充.通常叫做包金.
包金的可能不用到金片.还是应该用镀上去的.
镀层厚一点.如20mic 20年包金.

Gold Plated Jewelry:

Gold plated jewelry is NOT gold jewelry. Gold plated jewelry is jewelry made of a base metal (e.g. copper) or silver that has a very thin layer of gold applied to the top. The layer is so thin, that it can usually be rubbed off with a coarse pencil eraser in a few swipes. Some plated jewelry has a “thicker” layer of gold than other plated jewelry, but the difference is insignificant on the grand scale of things. When buying gold plated jewelry, you should consider the gold plating as nothing more than a coloring (an aesthetic attribute) – there is almost no inherent value to the gold applied. It doesn’t matter if it’s 24K, 14K or 18K.
14#
发表于 2019-1-27 22:34:01 | 只看该作者
2片14k的金片,中间加一个基本金属(黄铜)
你看过这种怀表壳吗?
15#
 楼主| 发表于 2019-1-27 22:42:44 | 只看该作者
I knew that American makers in the 19th Century were free to use whatever marks they felt like and that there was no standardization. What I find a bit odd is that a hallmark used on what had to be a rather common gold 18s Hunting case by a well known case maker could be so obscure. Seems like there should be a lot of BWCCo lion cases in peoples collections. When I was web-searching this, I could find lots of references to Eagles, Wheat, etc but absolutely nothing about lion marks.
16#
 楼主| 发表于 2019-1-27 22:44:13 | 只看该作者
gtgtgt 发表于 2019-1-27 22:34
2片14k的金片,中间加一个基本金属(黄铜)
你看过这种怀表壳吗?

请参考:板凳,包金的做法(英文)
17#
 楼主| 发表于 2019-1-27 22:45:58 | 只看该作者
gtgtgt 发表于 2019-1-27 22:34
2片14k的金片,中间加一个基本金属(黄铜)
你看过这种怀表壳吗?

Gold Filled 指的是将10Kt以上品位的金层用机械以高温高压处理的方式压延附着在金属基材(铜材等)上,也就是通常说的贴金.
18#
 楼主| 发表于 2019-1-27 22:47:23 | 只看该作者
19#
发表于 2019-1-27 22:51:25 | 只看该作者
引镜 发表于 2019-1-27 22:45
Gold Filled 指的是将10Kt以上品位的金层用机械以高温高压处理的方式压延附着在金属基材(铜材等)上,也 ...

喔.原来你不是来问的.
变成你是来教导的.
感谢.呵呵.
20#
 楼主| 发表于 2019-1-27 22:52:02 | 只看该作者
看来说半天没用,还得买1块没打标的“金表”研究1下才好。
要么注册1个美国钟表论坛问问人家
123下一页
您需要登录后才可以回帖 登录 | 注册

本版积分规则

联系我们|公司简介|隐私政策|手机版|小黑屋|Archiver|名表通 | www.watchlead.com ( 粤ICP备14096658号

粤公网安备 44010402002364

GMT+8, 2024-4-28 23:18 , Processed in 0.253315 second(s), 47 queries .

Powered by Discuz! X3.2

© 2008-2015 Comsenz Inc.

快速回复 返回顶部 返回列表