名表通

标题: ——军表,(*^__^*) 嘻嘻……! [打印本页]

作者: beauty    时间: 2012-1-30 20:37
标题: ——军表,(*^__^*) 嘻嘻……!


作者: 开心人    时间: 2012-1-30 20:38
针特别啊
作者: OHSEAL    时间: 2012-1-30 21:22
军表盘,军表金壳可是给高级别军官用的?
作者: lsun225    时间: 2012-1-30 21:34
金壳军表还真没见过,蓝针很漂亮。美丽兄爽了。
作者: beauty    时间: 2012-1-30 21:37
OHSEAL 发表于 2012-1-30 21:22
军表盘,军表金壳可是给高级别军官用的?

不知道呢,前几天在网上看到一个和我这个完全一样的,机芯编号只差1个数6857828,表壳也差一个数那个写着18这个写着19
作者: jjxing    时间: 2012-1-30 21:42
这货不错
作者: jonbrian    时间: 2012-1-30 21:45
终于现身了
作者: beauty    时间: 2012-1-30 21:46
lsun225 发表于 2012-1-30 21:34
金壳军表还真没见过,蓝针很漂亮。美丽兄爽了。


作者: 和尚李    时间: 2012-1-30 22:03
难道你的这块是19K金的
作者: beauty    时间: 2012-1-30 22:08
排骨汤面 发表于 2012-1-30 21:51
给看看后盖啊



作者: lxhprc    时间: 2012-1-30 22:19
漂亮啊。
作者: 机械米    时间: 2012-1-30 22:26
排骨汤面 发表于 2012-1-30 22:23
正瑞士壳配美国市场机芯,少见的配置哦

LXW也不一定是出口机芯的标记了,好多瑞士壳钢、金表上都有的。
但是大多也都有UNADJUSTED,搞不明白。
作者: beauty    时间: 2012-1-30 22:27
排骨汤面 发表于 2012-1-30 22:23
正瑞士壳配美国市场机芯,少见的配置哦

还别说那个和我一样表的那个人还发信问浪琴公司了,公司回复表是在美国卖出的!
作者: beauty    时间: 2012-1-30 22:29
排骨汤面 发表于 2012-1-30 22:23
正瑞士壳配美国市场机芯,少见的配置哦

I contacted Longines Switzerland about this watch. This is what they had to say:


Dear Mr. Sanders,

Thank you for your e-mail as well as for your interest in LONGINES watches.

We have pleasure in giving you below the information we found in our old, hand-written production register regarding your LONGINES watch.

Serial number 6'857'828 is a wrist watch in 14k gold reference 5603
It is been invoiced on 6th July 1945 to Messrs. Wittnauer, who were our agents in the U.S.A.for many years.
It is equipped with a movement calibre 23 M

Estimation: Swiss francs 1'200 (in good condition). It is very difficult for us to make an appraisal from afar without having the watch in hand.

Hope this information is convenient to you, and always at your disposal, I remain with my best regards.

Raymond Krebs
Archives & Documentation

Compagnie des Montres Longines Francillon SA
CH-2610 Saint-Imier, Switzerland
Phone +41 32 942 52 06 - Fax +41 32 942 54 29


作者: beauty    时间: 2012-1-30 22:32
机械米 发表于 2012-1-30 22:26
LXW也不一定是出口机芯的标记了,好多瑞士壳钢、金表上都有的。
但是大多也都有UNADJUSTED,搞不明白。

整表出口的,呵呵
作者: 机械米    时间: 2012-1-30 22:37
beauty 发表于 2012-1-30 22:32
整表出口的,呵呵

这信上看是这样的了
其实不排除壳、心分开卖的状况。
作者: beauty    时间: 2012-1-30 22:51
排骨汤面 发表于 2012-1-30 22:44
我倒还真好像没见过LXW机芯配瑞士金壳的呢


作者: beauty    时间: 2012-1-31 10:47
排骨汤面 发表于 2012-1-30 23:08
当时美国进口瑞士表税收高由两部分组成

一是整表在瑞士装壳

老外也蛮会省的,合理避税
作者: popolong1986    时间: 2012-1-31 11:10
多少年的表了?
作者: beauty    时间: 2012-1-31 11:28
popolong1986 发表于 2012-1-31 11:10
多少年的表了?

六十八年了
作者: 南海十三    时间: 2012-1-31 12:42
PM一下
作者: FLEX    时间: 2012-1-31 17:31
去年年底错过一只状态更好的钢的,可惜啊···
作者: lbliker    时间: 2012-1-31 18:01
为什么这是军表,认哪?
作者: lk99    时间: 2012-1-31 22:05
这样的避震少见
作者: 001eric    时间: 2012-2-1 22:45
这是个好东西呀~~~
作者: ybyu8185    时间: 2012-2-2 16:13
这个真的可以有,喜欢!




欢迎光临 名表通 (https://www.watchlead.com/wbbs/) Powered by Discuz! X3.2